input current การใช้
- With both methods, the input current regulation assists the commutation.
- ;Input current : Due to CMRR, which is described below ).
- Again using the nullator properties, the input current to the nullor is zero.
- The input current being drawn by the device is monitored for changes during this process.
- The lower voltage limits the input current to the initially stationary motor, which accelerates.
- That means that the input current has energy at harmonics of the frequency of the voltage.
- Which converges for large input currents to the previous leak-free model with refractory period.
- As a second voltage source is included, the input current depends on both the voltages.
- The maximum value of this input current is about 1.6 mA for a standard TTL gate.
- In the absence of any external magnetic field, the input current I splits into the two branches equally.
- However, for a Norton driver a current divider is formed at the input that reduces the input current to
- The " firing frequency " of the model thus increases linearly without bound as input current increases.
- The low input current of typical tag configurations allows for battery powering on coin cell or thin film batteries.
- Consequently, the excess input current is shunted away from the base and the transistor never goes into saturation.
- Hence the alternating magnetic field, and the induced output current, are out of step with the input current.
- :Input voltage is the same but, on no load, input current will be only the magnetising current.
- Yes the output curent is substantually the same, and cannot be equal or greater, than the input current.
- Through some calculus involving a Fourier transform, the firing frequency as a function of a constant input current thus looks like
- The output and input currents are low enough to prevent thermal overload under all load conditions even if the secondary is shorted.
- A line of positive slope may also be used to reflect the increase in firing rate that occurs as input current increases.
- ตัวอย่างการใช้เพิ่มเติม: 1 2 3